Core → Ticket → DynamicFieldDefault

Ticket::TicketDynamicFieldDefault###Element1

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: TicketCreate
Name: Field1
Value: Default

Ticket::TicketDynamicFieldDefault###Element10

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element11

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element12

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element13

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element14

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element15

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element16

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element2

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element3

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element4

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element5

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element6

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element7

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element8

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''

Ticket::TicketDynamicFieldDefault###Element9

Configures a default TicketDynamicField setting. "Name" defines the dynamic field which should be used, "Value" is the data that will be set, and "Event" defines the trigger event. Please check the developer manual (https://doc.znuny.org/doc/), chapter "Ticket Event Module".

This setting is not active by default.

Default value:

---
Event: ''
Name: ''
Value: ''