If your system uses SELinux, you should disable it, otherwise OTRS will not work correctly.
Here's how to disable SELinux for RHEL/CentOS/Fedora:
Configure SELINUX=disabled in the /etc/selinux/config file:
# This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - No SELinux policy is loaded. SELINUX=disabled # SELINUXTYPE= can take one of these two values: # targeted - Targeted processes are protected, # mls - Multi Level Security protection. SELINUXTYPE=targeted
Reboot your system. After reboot, confirm that the getenforce command returns
shell> getenforce Disabled
If you want to install OTRS from source, first download the source archive as .tar.gz, .tar.bz2, or .zip file from https://www.otrs.com/download-open-source-help-desk-software-otrs-free/
Unpack the archive (for example, using tar) into the directory
/opt, and rename the directory from otrs-x.x.x to otrs (see Script below).
shell> tar xzf /tmp/otrs-x.x.x.tar.gz shell> mv otrs-x.x.x /opt/otrs
Use the following script to get an overview of all installed and required CPAN modules.
shell> perl /opt/otrs/bin/otrs.CheckModules.pl o CGI..............................ok (v3.60) o Crypt::PasswdMD5.................ok (v1.3) o Crypt::SSLeay....................Not installed! (Optional - Required for Generic Interface SOAP SSL connections.) o CSS::Minifier....................ok (v0.01) o Date::Format.....................ok (v2.22) o Date::Pcalc......................ok (v1.2) ...
Please note that OTRS requires a working Perl installation with all "core" modules such as the module
version. These modules are not explicitly checked by the script.
You may need to install a
perl-core package on some systems
like RHEL that do not install the Perl core packages by default.
To install missing Perl modules, you can:
For Red Hat, CentOS, Fedora or compatible systems:
shell> yum install "perl(Digest::MD5)"
For SUSE Linux Enterprise Server, openSUSE or compatible systems: first determine the name of the package the module is shipped in. Usually the package for My::Module would be called "perl-My-Module".
shell> zypper search Digest::MD5
shell> zypper install perl-Digest-MD5
For Debian, Ubuntu or compatible systems first determine the name of the package the module is shipped in. Usually the package for My::Module would be called "libmy-module-perl".
shell> apt-cache search Digest::MD5
shell> apt-get install libdigest-md5-perl
Please note that it might be that you can't find all modules or their required versions in your distribution repository, in that case you might choose to install those modules via CPAN (see below).
Note that when you're on Linux you should run CPAN as your superuser account because the modules should be accessible both by the OTRS account and the account under which the web server is running.
shell> perl -MCPAN -e shell; ... install Digest::MD5 install Crypt::PasswdMD5 ...
Any optional modules listed by the script should be installed depending on the special requirements of the target system.
shell> useradd -d /opt/otrs -c 'OTRS user' otrs
Add user to webserver group (if the webserver is not running as the OTRS user):
shell> usermod -G www otrs (SUSE=www, Red Hat/CentOS/Fedora=apache, Debian/Ubuntu=www-data)
There is one OTRS config file bundled in
You must activate it by copying it without the ".dist" filename extension.
shell> cp /opt/otrs/Kernel/Config.pm.dist /opt/otrs/Kernel/Config.pm
shell> perl -cw /opt/otrs/bin/cgi-bin/index.pl /opt/otrs/bin/cgi-bin/index.pl syntax OK shell> perl -cw /opt/otrs/bin/cgi-bin/customer.pl /opt/otrs/bin/cgi-bin/customer.pl syntax OK shell> perl -cw /opt/otrs/bin/otrs.Console.pl /opt/otrs/bin/otrs.Console.pl syntax OK
"syntax OK" tells you all mandatory Perl modules are installed.
First of all, you should install the Apache2 web server and mod_perl; you'd typically do this from your systems package manager. Below you'll find the commands needed to set up Apache on the most popular Linux distributions.
# RHEL / CentOS: shell> yum install httpd mod_perl # SuSE: shell> zypper install apache2-mod_perl # Debian/Ubuntu: shell> apt-get install apache2 libapache2-mod-perl2
Most Apache installations have a
conf.d directory included.
On Linux systems you can usually find this directory under
Log in as root, change to the
conf.d directory and link the appropriate template in
/opt/otrs/scripts/apache2-httpd.include.conf to a file called
in the Apache configuration directory (to make sure it is loaded after the other configurations).
# Debian/Ubuntu: shell> ln -s /opt/otrs/scripts/apache2-httpd.include.conf /etc/apache2/sites-enabled/zzz_otrs.conf
OTRS requires a few Apache modules to be active for optimal operation. On most platforms you can make sure
they are active via the tool
shell> a2enmod perl shell> a2enmod version shell> a2enmod deflate shell> a2enmod filter shell> a2enmod headers
Now you can restart your web server to load the new configuration settings. On most systems you can do that with the command systemctl restart apache2.service.
Please execute the following command as root user to set the file and directory permissions for OTRS. It will try to detect the correct user and group settings needed for your setup.
shell> cd /opt/otrs/ shell> bin/otrs.SetPermissions.pl
Please use the web installer at http://localhost/otrs/installer.pl (replace "localhost" with your OTRS hostname) to setup your database and basic system settings such as email accounts.
The following configuration settings are recommended for MySQL setups. Please add the following
/etc/my.cnf under the [mysqld] section:
max_allowed_packet = 64M query_cache_size = 32M innodb_log_file_size = 256M
Please note that OTRS requires utf8 as database storage encoding.
Now you are ready to login to your system at http://localhost/otrs/index.pl with the credentials you configured in the web installer (User: root@localhost).
With this step, the basic system setup is finished.
The new OTRS daemon is responsible for handling any asynchronous and recurring tasks in OTRS.
What has been in cron file definitions previously is now handled by the OTRS daemon, which is
now required to operate OTRS. The daemon also handles all GenericAgent jobs and must be started from
shell> /opt/otrs/bin/otrs.Daemon.pl start
There are two default OTRS cron files in
and their purpose is to make sure that the OTRS Daemon is running.
They need to be be activated by copying them without the ".dist" filename extension.
shell> cd /opt/otrs/var/cron shell> for foo in *.dist; do cp $foo `basename $foo .dist`; done
To schedule these cron jobs on your system, you can use the script
shell> /opt/otrs/bin/Cron.sh start
Stopping the cron jobs is also possible (useful for maintenance):
shell> /opt/otrs/bin/Cron.sh stop
All regular OTRS commandline operations happen via the otrs Console interface
bin/otrs.Console.pl. This provides an auto completion
for the bash shell which makes finding the right command and options much easier.
You can activate the bash autocompletion by installing the package
It will automatically detect and load the file
/opt/otrs/.bash_completion for the
After restarting your shell, you can just type
bin/otrs.Console.pl followed by TAB,
and it will list all available commands. If you type a few characters of the command name, TAB will show
all matching commands. After typing a complete command, all possible options and arguments will be shown
by pressing TAB.
We advise you to read the OTRS performance tuning chapter.
If you encounter problems with the installation, you can send a message to our mailing list email@example.com (http://lists.otrs.org/).
You can also ask the OTRS Group to either help you in planning or deploying OTRS, or review your installed OTRS system. Our professional services are designed to help you deploy OTRS faster and to get the most benefit out of OTRS.